Heavy-Duty Spring Loaded T-Bolt

Heavy-Duty Spring Loaded T-Bolt

Purosil’s silicone knit hose provides a quality solution, for standard coolant and air management applications. The fabrication process is dynamic and consists of a multitude of geometrical design options. In respect to operational conditions, all hoses are capable of meeting either standard temperatures of (-65F to 350F) polyester reinforcement, or (-65F to 500F) utilizing Aramid reinforcement. Meets both SAE J20R3 and SAE J20R4 specifications.

FEATURES & BENEFITS

  • Helical spring design compensates for pressure and temperature changes.
  • Excellent choice for air-to-air (CAC and Turbo) applications.
  • Designed for use in high vibration applications.
  • 300 Series Stainless Steel, smooth bore band.
Part # Clamping Range (in)
PCL-413TB-HDS 4.13-4.44

Spring Loaded T-Bolt

Spring Loaded T-Bolt

FEATURES & BENEFITS

  • Helical spring design compensates for pressure and temperature changes.
  • Excellent choice for air-to-air (CAC and Turbo) applications.
  • Designed for use in high vibration applications.
  • 300 Series Stainless Steel, smooth bore band.
Part # Clamping Range (in)
PCL-225TB-S 2.25-2.56
PCL-275TB-S 2.75-3.06
PCL-300TB-S 3.00-3.31
PCL-306TB-S 3.06-3.37
PCL-325TB-S 3.25-3.56
PCL-356TB-S 3.56-3.87
PCL-406TB-S 4.06-4.37
PCL-425TB-S 4.25-4.56
PCL-456TB-S 4.56-4.87
PCL-500TB-S 5.00-5.31
PCL-525TB-S 5.25-5.56
PCL-550TB-S 5.50-5.81
PCL-575TB-S 5.75-6.06

Wave Seal 360 IDEAL

Wave Seal 360 IDEAL

FEATURES & BENEFITS

  • Heavy-duty constant tension clamp
  • Compact/low profile
  • Designed for fluid and air-to-air applications
  • Unique 360° sealing pattern responds to pressure and temperature changes
  • 9/16″ band width
  • 300 Series Stainless Steel spring liner
Part # Clamping Range (in)
PCL-16WS .81-1.31
PCL-20WS 1.03-1.56
PCL-24WS 1.19-1.81
PCL-28WS 1.34-2.06
PCL-32WS 1.53-2.31
PCL-34WS 1.61-2.44
PCL-36WS 1.69-2.56
PCL-40WS 1.81-2.81
PCL-44WS 2.03-3.06
PCL-48WS 2.19-3.31
PCL-52WS 2.34-3.56
PCL-56WS 2.53-3.81
PCL-60WS 2.64-4.06
PCL-64WS 2.81-4.31
PCL-72WS 3.19-4.81
PCL-80WS 3.53-5.31
PCL-88WS 3.81-5.81
PCL-104WS 4.87-6.81

Fluorocarbon Lined Hose

Fluorocarbon Lined Hose

Designed to resist aromatic and aliphatic hydrocarbons as well as alcohols, water, and fuel additives.

The fluorocarbon elastomer provides an excellent barrier to hydrocarbons and a volume swell of less than 5% in diesel fuel. The Purosil design offers an excellent chemical bond between the fluorocarbon liner and the silicone rubber composite structure.

The continuous operating temperature is 235°C or 455°F, and the low temperature brittleness point is -43°C or -45°F.

The combination of aramid fabric, silicone rubber and fluorocarbon liner provides excellent performance and enhanced features for the new generation of EPA-compliant truck and diesel engine hoses.

Formed Hose

Formed Hose

Formed hose can be made in a wide range of arbitrary shapes with Aramid or Polyester reinforcement layers. Custom designed to meet difficult and demanding OEM applications.

FEATURES & BENEFITS

  • Complex Custom Shapes
  • Tee’s, bends, and diameter changes
  • Excellent flexibility.
  • Aramid or Polyester reinforcement
  • UV and ozone resistant.
  • Fluorocarbon liner available for increased petrochemical combustion residue resistance.
  • Custom ply configurations available to meet flexibility and burst requirements.

Silicone Knit Hose

Silicone Knit Hose

Purosil’s silicone knit hose provides a quality solution, for standard coolant and air management applications. The fabrication process is dynamic and consists of a multitude of geometrical design options. In respect to operational conditions, all hoses are capable of meeting either standard temperatures of (-65F to 350F) polyester reinforcement, or (-65F to 500F) utilizing Aramid reinforcement. Meets SAE J20R4 specifications.

FEATURES & BENEFITS

  • Custom Shapes
  • Low tooling cost
  • Low minimun order quantities
  • SAE J20R4 compliance
  • Optional wire reinforcment available

Odd Angle Elbows

Odd Angle Elbows

Odd angle EPDM air intake elbow that complies with the increased expectations of modern diesel and gas powered engines. Available for OEM and aftermarket applications.

FEATURES & BENEFITS

  • Specifically formulated EPDM compound.
  • Vacuum collapse rating exceeds 4″ Hg. mercury.
  • Recommended for temperatures: -60°F to +300°F duty.
  • Complies with physical properties requirements of ASTM D2000 3BA715A14B13C12F17.
    • 70 ±5 Shore A Hardness
    • 1500 PSI Tensile, minimum.
    • 250% Elongation, minimum.
    • Air Age, 70 Hrs. at 100° C.
    • Durometer Change, +10, maximum.
    • Tensile Change, -25%, maximum.
    • Elongation Change, -25%, maximum.
    • Comp. Set, Method B, at 70° C. 25% maximum.
    • Ozone Resistance, D1171, Method B, Quality Retention Rating: 100%
    • Low Temp. Brittleness, D2137, Method A. Non Brittle After 3 Minutes at -40° C.
Part # a ID1 ID2 A B LL1 LL2 R T
22L40 22.00 4.00 4.00 4.25 1.00 1.50 1.50 4.00 0.25
22L55 22.00 5.50 5.50 5.00 1.25 1.50 1.50 4.50 0.25
22L60 22.00 6.00 6.00 5.50 1.50 1.75 1.75 4.50 0.25
22L70 22.00 7.00 7.00 5.75 1.50 2.00 2.00 4.50 0.31
38L60 38.00 6.00 6.00 7.38 3.00 1.50 1.50 6.00 0.25
54L55 54.00 5.50 5.50 7.81 3.25 1.75 1.75 6.00 0.25
54L60 54.00 6.00 6.00 7.44 3.50 1.75 1.75 5.75 0.25
63L80 63.00 8.00 8.00 12.00 7.00 2.00 2.00 12.00 0.38
63L80R70 63.00 8.00 7.00 12.50 7.00 2.00 2.00 12.50 0.38
68L45 68.00 4.50 4.50 6.00 4.00 1.50 1.50 4.30 0.25
68L55 68.00 5.50 5.50 7.88 6.50 2.00 2.00 5.50 0.25
68L60 68.00 6.00 6.00 9.13 6.50 1.63 1.63 7.25 0.25
68L70 68.00 7.00 7.00 7.88 6.00 2.13 2.13 5.50 0.25
68L70R60 68.00 7.00 6.00 7.00 7.00 2.00 3.50 4.00 0.25
180L70R50WF 180.00 7.00 5.00 11.20 3.00 3.00 1.20 0.31

Straight Hose

Straight Hose

Straight silicone hose for wet exhaust marine applications. SAE J2006 compliant for reliability and safety. Available in large bore up to 20 inches.

FEATURES & BENEFITS

  • High performance.
  • Meets and exceeds SAE J2006 industry standards.
  • Available in 4 ply for standard bore and 6 ply for large bore.
  • High-quality polyester reinforced.
  • Recommended for temperatures: -65°F to 350°F (-53.9°C to 176.6°C).
  • Standard lengths: 36″ and144″. Note: Special lengths available upon request.
Part # ID (inches) Plys
70MAR-031 0.31 4
70MAR-038 0.38 4
70MAR-050 0.50 4
70MAR-062 0.62 4
70MAR-075 0.75 4
70MAR-087 0.87 4
70MAR-100 1.00 4
70MAR-106 1.06 4
70MAR-112 1.12 4
70MAR-125 1.25 4
70MAR-131 1.31 4
70MAR-138 1.38 4
70MAR-150 1.50 4
70MAR-162 1.62 4
70MAR-175 1.75 4
70MAR-187 1.87 4
70MAR-200 2.00 4
70MAR-212 2.12 4
70MAR-225 2.25 4
70MAR-238 2.38 4
70MAR-250 2.50 4
70MAR-262 2.62 4
70MAR-275 2.75 4
70MAR-287 2.87 4
70MAR-300 3.00 4
70MAR-312 3.12 4
70MAR-325 3.25 4
70MAR-338 3.38 4
70MAR-350 3.50 4
70MAR-362 3.62 4
70MAR-375 3.75 4
70MAR-400 4.00 4
70MAR-425 4.25 4
70MAR-412 4.12 4
70MAR-450 4.50 4
70MAR-500 5.00 4
7060MAR-550 5.50 6
7060MAR-600 6.00 6
7060MAR-662 6.62 6
7060MAR-700 7.00 6
7060MAR-800 8.00 6
7060MAR-1000 10.00 6
7060MAR-1200 12.00 6
7060MAR-1400 14.00 6
7060MAR-1600 16.00 6
7060MAR-1800 18.00 6
7060MAR-2000-12 20.00 6

Flex Hose – Convoluted Smooth Bore

Flex Hose – Convoluted Smooth Bore

Convoluted smooth bore for a flexible fit in wet exhaust marine applications. SAE J2006 compliant for reliability and safety.

FEATURES & BENEFITS

  • High performance.
  • Meets and exceeds SAE J2006 industry standards.
  • High-quality polyester reinforced.
  • Recommended for temperatures: -65°F to 350°F (-53.9°C to 176.6°C).
  • Standard lengths: 36″ and144″. Note: Special lengths available upon request.
Part # ID (inches) Plys Standard Lengths
92MAR-100-144 1.00 2 36″ or 144″
92MAR-106-144 1.06 2 36″ or 144″
92MAR-125-144 1.25 2 36″ or 144″
92MAR-131-144 1.31 2 36″ or 144″
92MAR-138-144 1.38 2 36″ or 144″
92MAR-150-144 1.50 2 36″ or 144″
92MAR-162-144 1.62 2 36″ or 144″
92MAR-175-144 1.75 2 36″ or 144″
92MAR-187-144 1.87 2 36″ or 144″
92MAR-200-144 2.00 2 36″ or 144″
92MAR-212-144 2.12 2 36″ or 144″
92MAR-225-144 2.25 2 36″ or 144″
92MAR-238-144 2.38 2 36″ or 144″
92MAR-250-144 2.50 2 36″ or 144″
92MAR-262-144 2.62 2 36″ or 144″
92MAR-275-144 2.75 2 36″ or 144″
92MAR-287-144 2.87 2 36″ or 144″
92MAR-300-144 3.00 2 36″ or 144″
92MAR-312-144 3.12 2 36″ or 144″
92MAR-325-144 3.25 2 36″ or 144″
92MAR-338-144 3.38 2 36″ or 144″
92MAR-350-144 3.50 2 36″ or 144″
92MAR-362-144 3.62 2 36″ or 144″
92MAR-375-144 3.75 2 36″ or 144″
92MAR-400-144 4.00 2 36″ or 144″
92MAR-425-144 4.25 2 36″ or 144″
92MAR-450-144 4.50 2 36″ or 144″
92MAR-450-475 4.75 2 36″ or 144″
92MAR-500-475 5.00 2 36″ or 144″

Flex Hose – Flat Cover

Flex Hose – Flat Cover

2-ply, flat cover flex hose for wet exhaust marine applications.

FEATURES & BENEFITS

  • High performance.
  • High-quality polyester reinforced.
  • Recommended for temperatures: -65°F to 350°F (-53.9°C to 176.6°C).
  • Standard lengths: 36″ and144″. Note: Special lengths available upon request.
Part # ID (inches) Plys Standard Lengths
92FMAR-100-144 1.00 2 144″
92FMAR-106-144 1.06 2 144″
92FMAR-125-144 1.25 2 144″
92FMAR-131-144 1.31 2 144″
92FMAR-138-144 1.38 2 144″
92FMAR-150-144 1.50 2 144″
92FMAR-162-144 1.62 2 144″
92FMAR-175-144 1.75 2 144″
92FMAR-187-144 1.87 2 144″
92FMAR-200-144 2.00 2 144″
92FMAR-212-144 2.12 2 144″
92FMAR-225-144 2.25 2 144″
92FMAR-238-144 2.38 2 144″
92FMAR-250-144 2.50 2 144″
92FMAR-262-144 2.62 2 144″
92FMAR-275-144 2.75 2 144″
92FMAR-287-144 2.87 2 144″
92FMAR-300-144 3.00 2 144″
92FMAR-312-144 3.12 2 144″
92FMAR-325-144 3.25 2 144″
92FMAR-338-144 3.38 2 144″
92FMAR-350-144 3.50 2 144″
92FMAR-362-144 3.62 2 144″
92FMAR-375-144 3.75 2 144″
92FMAR-400-144 4.00 2 144″
92FMAR-425-144 4.25 2 144″
92FMAR-450-144 4.50 2 144″
92FMAR-475-144 4.75 2 144″
92FMAR-500-144 5.00 2 144″